top of page
Our Products banner 2
Our Products banner
Our Products banner 3

For all that needs

DCC Wi-Fi Command Station

The RB1110 command station and its newer version, the RB1110-Mini, are designed to control model trains equipped with DCC decoders, as well as to operate accessory decoders, such as turnout or signal decoders. The devices comply with the NMRA DCC standard and support the following protocols: XpressNet® version 4.0, LocoNet® (including LocoNet-TCP/IP), LenzLAN, Z21®, WiThrottle, and feedback modules via the S88, LocoNet®, and RS-Bus protocols.

RB1110

DCC Booster

The RailBOX DCC Booster is designed for controlling model trains equipped with DCC decoders and accessory decoders. The booster operates using the DCC standard, which also supports the Railcom® protocol.

RB1200

Wi-Fi Adapter

The RB 1310 WiFi Adapter is intended to control command stations with XpressNet® or LocoNet® interfaces using a tablet (or phone) with the RailBox: Railroad Control app installed.

RB1310

Plux22 / NEM652 Loco Decoder

The RB2212 locomotive decoder is intended for controlling HO scale locomotives in digital (DCC) or analog mode. It features a Plux22 or NEM652 interface and includes a backEMF function.

RB2212

DCC Wi-Fi Loco Sound Decoder (Plux22/NEM652)

The RB 2300 DCC Wi-Fi sound motor decoder is intended for controlling HO scale locomotives in digital mode (DCC) with sound playback capability. It comes with a Plux22 or NEM652 connector, includes a built-in Wi-Fi module for uploading sounds without needing additional hardware or software, and supports backEMF for smooth motor control. The decoder supports the DCC standard and Railcom® protocol.

RB2300

DCC Wi-Fi Loco Sound Decoder 21MTC

The RB 2310 DCC Wi-Fi sound motor decoder is also designed for HO scale locomotives in digital mode (DCC) with sound playback capability. It uses a 21MTC interface and features a built-in Wi-Fi module for wireless sound upload without additional equipment or software, as well as backEMF. It operates according to the DCC standard and supports the Railcom® protocol.

RB2310

SM42 KIT with Plux22 Connector

The SM42 conversion kit is intended to adapt the original HO scale model to be compatible with Plux22 connector decoders. This DIY kit enables full lighting control according to PKP E1 standards.

RB2400

ES64U2 (Husarz/Taurus) KIT with Plux22 Connector

The ES64U2 (Husarz/Taurus/Euro Sprinter) kit is designed to convert the original HO scale model for compatibility with Plux22 decoders. These DIY kits allow independent control of all lighting types.

RB2410

BR185 (Traxx) KIT with Plux22 Connector

The BR185 (Traxx) kit is designed to convert the original HO scale model to fit Plux22 connector decoders. These DIY kits allow independent control of all lighting types.

RB2411

Y-Type LED Strip with DCC Decoder

RB 2130 is a universal LED lighting strip with DCC decoder for “Y”-type passenger cars (110A, 111A, 112A) from Roco®, PIKO®, and ROBO®. It operates in both DCC and analog mode, allowing separate illumination of vestibules, toilets, compartments, and corridors. The decoder supports the Railcom® protocol. LEDs are available in warm and neutral white.

RB2130

Z-Type LED Strip with DCC Decoder

Application – for motor and sound decoders in locomotive models where a standard cylindrical capacitor does not fit.

RB2140

DCC Universal LED strip 85-280mm

Universal lighting PCB RB 2124 with built-in DCC decoder is used to for wagon lighting in H0 or TT scale. RB 2124 works in DCC mode and in "analog", it allows you to light different parts of the wagons in different sizes by shortening the PCB along perforations, in the way to fit into desired wagon. This decoder supports Railcom ® and DCCA protocols.

RB2124

LED Strip with DCC Decoder 90–250mm

A universal DCC lighting strip with decoder for passenger cars. The strip has 7 segments (2 end segments) and can be adjusted to the length of the car by breaking off unnecessary sections along perforations. LEDs are available in warm white and neutral white colors.

RB2122

4-Servo Decoder

The decoder is intended for controlling 4 model servos with adjustable position and speed. Suitable for controlling barriers, cranes, doors, and turnouts.

RB4100

Turnout Decoder

RB 4310 is a universal DCC accessory decoder for controlling railway turnouts via bipolar motors (e.g., Conrad 2201977), polarized frog motors, MTB drive motors, and solenoid drives for controlling railway switches (Roco®, PIKO®, and others) or semaphore signals (e.g., Viessmann 4500). The latest versions (E and above) offer a permanent output mode, ideal for layout lighting.

RB4310

DCC Accessory Decoder

RB 4400 is a universal DCC accessory decoder that supports three modes: turnout control (MTB motor drives and solenoid drives), semaphore signal control, and LED lighting or servo control.

RB4400

Level Crossing Decoder

Railway crossing control module

RB5100

Track Occupancy Detector S88

Module for receiving feedback information via a Z21 emulator or any DCC command station supporting S88

RB5200

Automation Module

The RB5300 module is used to “digitize” traditional push-button or DIY control panels. It allows controlling accessory decoders (turnouts, signals, etc.) with buttons and switches. It also enables display of turnout positions, signal aspects, routes, and track occupancy via panel-integrated LEDs.

RB5300

DCC Reverse Loop Module

The RB5410 reverse loop module automatically eliminates short circuits occurring during entry and exit of a reverse loop by switching polarity in the isolated loop section. This prevents permanent shorts when a locomotive crosses insulated rail sections.

RB5310

Subscribe to the newsletter

© 2018-2025 by RailBOX Electronics.

bottom of page