Introduction:

DCC Wi-Fi sound loco decoder RB 2300 is designed to control HO scale locomotive models in digital mode (DCC) with the ability to play sounds. The decoder comes with a Plux22 or NEM652 connector, has a built-in Wi-Fi module for recording sounds without buying additional hardware or installing software, and a backEMF function for smooth engine control. The decoder works in accordance with the DCC standard and supports the Railcom ® protocol.

Note: When testing the decoder, it is best to close the locomotive model to avoid damaging by touching tracks by the bare external components (e.g.speaker), or secure it in another way, e.g. by inserting such elements into a string bag. The entire decoder is well protected by a heat shrinkable tube, but this does not apply to external components, so damage during unprotected testing of the decoder cannot be a reason for complaint and is entirely the responsibility of the customer.

Basic functions:

· The decoder supports addresses 1-10239

· Group addresses for multiple traction (consist) 1-127

· Support F0-F12 for function outputs and up to F28 for sounds

· Support 28 or 128 speed steps

· Ability to program CV on the main track (PoM) and on the programming track

· Supports Railcom ® protocol

· Ability to easily configure the decoder via RailBOX: Railroad Control mobile application

· Back-EMF System (allows control smoothly at low speeds)

· 9 function outputs and 3 logic outputs

· Output mapping and lighting effects

· Possibility to connect an external UPS capacitor to ensure uninterrupted operation on dirty tracks or when driving through jturnouts without a powered crossover (UPS capacitor 470uF 25V is included)

· Possibility to connect up to two model serwomotors (e.g. for controlling pantographs)

· Ability to enable/disable Wi-Fi via DCC function

· Ability to update the decoder software via Wi-Fi without the need to open the model. Watch a tutorial

· A web server for uploading your own audio files through the browser without the need to purchase additional hardware and/or installing software. Download all avaliable ssound packs, mappings and software updates here

· Pre-installed basic sound package for electric, steam and diesel locomotives

· Synchronization of a sound with the current speed of the locomotive

Technical parameters:

· Decoder dimensions-30 x 16 x 6.5 mm (NMRA Plux22 Standard)

· Decoder power supply-7-22V (DCC)

· Maximum output load-0.5 A

· Motor instantaneous load- 2.5 A

· Continuous motor load - 1A

· Maximum total output load for model servomotors: - 0.5 A

· Wi-Fi: standard 802.11 b/g/n (2.4 GHz)

· Sound:

· 6MB of internal memory (total length up to 350 sec)

· Supported audio formats: PCM, ADPCM, Vorbis (OGG)

· Sampling rate: 8kHz, 16kHz, 32kHz and 44.1 kHz

· Number of bits per sample: 16

Maximum power for speaker output 2.5 W (4Ohm) (speaker with resonance chamber is included)