Application

The RB1110 command station and its newer version, the RB1110-Mini, are designed to control model trains equipped with DCC decoders, as well as to operate accessory decoders, such as turnout or signal decoders. The devices comply with the NMRA DCC standard and support the following protocols: XpressNet® version 4.0, LocoNet® (including LocoNet-TCP/IP), LenzLAN, Z21®, WiThrottle, and feedback modules via the S88, LocoNet®, and RS-Bus protocols.

Control can be performed using mobile applications such as RailBOX: Railroad Control, Roco Z21®, Engine Driver, or others, as well as using controllers compatible with XpressNet®, LocoNet®, or WiThrottle protocols. It is also possible to control the system from a computer using software like GBBkolejka, iTrain, RocRail, and TrainController.

Automatic detection of modern DCC decoders is possible thanks to support for the RailCom and DCCA protocols.

The RB1110-Mini model additionally allows connection of an external command station via a DCC-Sniff input.

The command station is equipped with single ports: XpressNet®, s88-N, RS-Bus, LocoNet®, USB-C and includes a built-in Wi-Fi module.

Key Features:

• Support for up to 60 active locomotives (addresses 1–10239)

• Unlimited number of locomotives in the RailBOX: Railroad Control application

• Support for controllers via XpressNet® (e.g., Lokmouse, Multimaus, Rocomouse, Lenz LH01/LH90/LH100)

• Support for controllers via LocoNet® (e.g., FRED, Piko SmartControl®)

• Support for controllers via the wireless WiThrottle protocol

• Control via external command station using DCC-Sniff input (RB1110-Mini)

• Easy configuration and control of accessories using an interactive map in the RailBOX: Railroad Control application

• Automatic decoder detection system (RailCom, DCCA)

• Support for accessory addresses 1–2044

• CV read and write in programming track, PoM, and PoM ACC modes

• Support for 28 and 128 speed steps and functions from F0 to F63

• Feedback support via S88, LocoNet®, RS-Bus

• Additional expansion port for connecting external modules (e.g., IR receiver for Märklin "MyWorld" controllers) – only in RB1110-Mini

• Voltage and current draw indicator (LED displays – only in RB1110)

• Automatic DCC voltage restoration after a short circuit

• Built-in Wi-Fi module

• Firmware updates via the RailBOX application

Technical Specifications:

• Command station dimensions:

  • RB1110: 90 x 110 x 45mm

  • RB1110-Mini: 100 x 104 x 22mm

• Power supply – DC 12–19V / min 3.4A

• DCC output – voltage depends on the power supply used, max 3A

Maximum Command Station Load:

Important: The maximum instantaneous load of the command station is 3A. This means that only a limited number of trains can run simultaneously on the model railroad, and only a limited number of accessory decoders can be operated without using an additional booster. Sample current consumption values:

• Driving decoder: approx. 0.2A

• Driving and sound decoder: approx. 0.3A

• Wagon lighting decoder (LED strip): approx. 0.05A

Connection

WARNING: Do not use power clips for tracks with a built-in capacitor (e.g., Piko 55270) or similar when working with a DCC command station. These clips are intended for powering tracks with DC voltage and are not suitable for use with pulsed DCC voltage. Using such clips may damage the DCC command station, which will not be eligible for warranty repair.